岩棉保温板厂家
免费服务热线

Free service

hotline

010-00000000
岩棉保温板厂家
热门搜索:
行业资讯
当前位置:首页 > 行业资讯

基于MAX16834大功率高亮HBLED驱动方案

发布时间:2020-07-21 17:51:18 阅读: 来源:岩棉保温板厂家

基于MAX16834大功率高亮HB LED驱动方案 Maxim 公司的MAX16834是电流模式大功率高亮度LED(HB LED)驱动器,可组成升压,升-降压,SEPIC和高边降压拓扑.除了用开关PWM控制器驱动N沟功率MOSFET外,还能驱动N沟PWM调光开关. MAX16834输入电压从4.75V 到28V,3000:1 PWM调光/模拟调光,工作频率从100kHz 到1MHz可编程,主要用在单串LED LCD背光,汽车前后照明,精密系统RGB LED光源,DC/DC升压/升-降压转换器等.本文介绍MAX16834主要特性,方框图,多种应用电路以及MAX16834评估板主要特性,电路图,材料清单和PCB元件布局图. The MAX16834 is a current-mode high-brightness LED (HB LED) driver for boost, boost-buck, SEPIC, and highside buck topologies. In addition to driving an n-channel power MOSFET switch controlled by the switching controller, it also drives an n-channel PWM dimming switch to achieve LED PWM dimming. The MAX16834 integrates all the building blocks necessary to implement a fixed-frequency HB LED driver with wide-range dimming control. The MAX16834 features constant-frequency peak current-mode control with programmable slope compensation to control the duty cycle of the PWM controller.A dimming driver designed to drive an external n-channel MOSFET in series with the LED string provides wide-range dimming control up to 20kHz. In addition to PWM dimming, the MAX16834 provides analog dimming using a DC input at REFI. The programmable switching frequency (100kHz to 1MHz) allows design optimization for efficiency and board space reduction. A single resistor from RT/SYNC to ground sets the switching frequency from 100kHz to 1MHz while an external clock signal at RT/SYNC disables the internal oscillator and allows the MAX16834 to synchronize to an external clock. The MAX16834’s integrated highside current-sense amplifier eliminates the need for a separate high-side LED current-sense amplifier in boost-buck applications. The MAX16834 operates over a wide supply range of 4.75V to 28V and includes a 3A sink/source gate driver for driving a power MOSFET in high-power LED driver applications. It can also operate at input voltages greater than 28V in boost configuration with an external voltage clamp. The MAX16834 is also suitable for DCDC converter applications such as boost or boostbuck. Additional features include external enable/ disable input, an on-chip oscillator, fault indicator output (FLT) for LED open/short or overtemperature conditions, and an overvoltage protection sense input (OVP+) for true overvoltage protection. The MAX16834 is available in a thermally enhanced 4mm x 4mm, 20-pin TQFN-EP package and in a thermally enhanced 20-pin TSSOP-EP package and is specified over the automotive -40℃ to +125℃ temperature range. MAX16834主要特性: _ Wide Input Operating Voltage Range (4.75V to 28V) _ Works for Input Voltage > 28V with External Voltage Clamp on VIN for Boost Converter _ 3000:1 PWM Dimming/Analog Dimming _ Integrated PWM Dimming MOSFET Driver _ Integrated High-Side Current-Sense Amplifier for LED Current Sense in Boost-Buck Converter _ 100kHz to 1MHz Programmable High-Frequency Operation _ External Clock Synchronization Input _ Programmable UVLO _ Internal 7V Low-Dropout Regulator _ Fault Output (FLT) for Overvoltage, Overcurrent, and Thermal Warning Faults _ Programmable True Differential Overvoltage Protection _ 20-Pin TQFN-EP and TSSOP-EP Packages MAX16834应用: Single-String LED LCD Backlighting Automotive Rear and Front Lighting Projection System RGB LED Light Sources Architectural and Decorative Lighting (MR16, M111) Spot and Ambient Lights DC-DC Boost/Boost-Buck Converters图X16834方框图图X16834升压LED驱动器图X16834升压-降压LED驱动器(VLED+ 28V)图X16834带汽车电子负载突变保护的升压LED驱动器图X16834高边降压LED驱动器图X16834升压DC/DC转换器图X16834升压-降压DC/DC转换器MAX16834评估板The MAX16834 evaluation (EV kit) is a fully assembled and tested surface-mount PCB designed to evaluate the MAX16834 pulse-width modulated (PWM) HB LED driver controller in a step-up (boost) configuration and optional step-up/step-down (buck-boost) e MAX16834 EV kit operates from a DC supply voltage of 7V to 28V and requires up to 5A. The MAX16834 EV kit circuit is configured to deliver up to 1A of current into series LEDs with a maximum forward voltage of e MAX16834 EV kit features two different types of dimming control using either an analog linear input voltage or digital PWM input signal to control the LED brightness. This EV kit has an undervoltage lockout (UVLO) feature that disables the EV kit and overvoltage protection that protects the circuit under no-load conditions. The EV kit also features a active-low FLT PCB pad to monitor for open or short-circuit LED conditions at the LED+ and LED- PCB pads. The MAX16834 EV kit is a fully assembled and tested surface-mount X16834评估板主要特性:? 7V to 28V Wide Supply Voltage Range? Configured for Boost Operation? Configurable for Buck-Boost Operation? 1A Output Current? Analog Linear Dimming Control? PWM Dimming Control? Open/Short-Circuit LED Fault Indicator (FLT)? Demonstrates Output Overvoltage Protection? Optional Load Dump Circuit? Fully Assembled and Tested图X16834评估板电路图MAX16834评估板材料清单(BOM):图X16834评估板元件布局图

青岛碧莲盛

合肥碧莲盛好吗

太原碧莲盛植发